帕金斯发动机活塞冷却喷嘴维修保养的安装方法

Piston cooling jets

2800

To remove and to fit

Special requirements

Operation 4-

Special tools
Description	Part number
Engine turning tool	CH48
Jet alignment tool	GE50004

To remove

  Remove oil pump, Operation 0.

2 Use the engine turning tool, CH48, to turn the crankshaft in a clockwise direction (as seen from the front

of the engine) to obtain access to the relevant piston cooling jet.

  Remove the bolt which retains the cooling jet and remove the cooling jet from the engine.

4  Repeat steps 2 and  for the cooling jets which remain.

To fit

  Before a piston cooling jet is fitted to the engine, use the jet alignment tool, GE50004, to ensure that the

direc tion of the nozzles is correct.

Caution: If, when fitted to the alignment tool, a nozzle does not align correctly with the relevant dowel, discard

the c ooling jet; do NOT fit a damaged or distorted cooling jet to the engine.

2 Carefully fit the piston cooling jets to the engine, ensure that the nozzles of the cooling jets are not damaged

or distorted during the operation. Turn the cranks haft clockwise (as seen from the front of the engine) as

necessary to obtain access to the relevant positions.

  Fit the oil pump, Operation 0. ，珀金斯404缸盖,杭州铂金斯发动机配件,ERKINS 403D配件,沃尔沃TAD720VE位置传感器,沃尔沃TAD720VE电喷柴油发动机配件,沃尔沃TAD720VE传感器,三菱 发电机机油滤清器